Products

HIGH COUNTRY TEK - Closed-loop Proportional Solenoid Valve Controller, ProValve 200

The ProValve 200 is an electronic control module for use with proportional solenoid valves in a closed loop system. The integrated PID controller monitors the process feedback and adjusts the current to the solenoids of the valve to achieve the desired position. This closed loop approach significantly simplifies system level control. The module includes indicators on the front panel to provide an overview of the operating status. System configuration is accomplished through a convenient remote terminal. All settings are stored in permanent memory within the unit. The unit is housed in an attractive, compact enclosure.

Application Information:

  • Various analog input options with digital enable and override capability
  • Easily configured using the SAM software or our Hand Held Interface
  • Easily configured using SAM software or our Hand Held Interface
  • Front panel indicators for Power, Output Current and System Faults
  • Standard 35mm DIN rail mounting
  • Removable terminals to simplify wiring and maintenance
  • Efficient 15.6 kHz PWM operation
  • Selectable dither frequency up to 244 Hz
  • Adjustable current limited output with short circuit protection
  • Independently adjustable minimum and maximum for target position and position feedback inputs
  • Full-featured PID control loop
  • Microprocessor controlled for consistent, reliable performance

Operating Specifications:

Item ProValve 200
Supply Voltage 12 to 30VDC
Supply Current Isol + 50mA†
Output Current Standard:  2.5A MAX.   -L:  500mA MAX.
Solenoid Resistance Standard:  2 Ohm MIN. -L:  10 Ohm MIN.
Dither Settings Off, 35, 41, 49, 61, 81, 122, 244 Hz
Analog Input Range 0 to 10V, 0 to 5V, 0-20mA, 4-20mA
Digital Input Range -24 12 to 30 VDC Positive or Negative Logic, -115 100 to 130 VAC, -230 210 to 250 VAC
Digital Input Impedance -24 3.3kΩ, -115 33kΩW, -230 75kΩ
Process Linearity ±0.1% of full input range
Process Repeatability ±0.2% of full input range
Process Control PID Control Loop, 10 ms loop time
Operating Temperature Range 0 to +70 Deg. C

† Additional current is required when the hand held interface is attached

Part Numbers:

Part Number Description
PV200-24 12 to 30 VDC digital input range
PV200-115 100 to 130 VAC digital input range
PV200-230 210 to 250 VAC digital input range